Category: Appliance Parts

If you live in Kathmandu valley, and your washing machine or dryer is experiencing issues, you might be panicking about what to do. However, fear not – there are several reliable and trustworthy repair services in the city that can help you out. 

In this article, we will dive into the world of washing machine and dryer repair, exploring some of the best service providers available to you. So, if you’re struggling with a malfunctioning appliance, keep reading to find out how to get back to clean clothes and dry towels in no time.

Understand your washing machine and dryer 

Understanding Your Washing Machine and Dryer is an essential part of their long-term maintenance. A washing machine is designed to clean your clothes and usually operates with two cycles, washing and rinsing. A dryer, on the other hand, typically has a single cycle; drying. 

Knowing the components of your washing machine and dryer is vital to identifying any potential problems. The most common washing machine problems are failing to start and not spinning or draining, whereas the most common issue with dryers is not heating up, resulting in clothes not drying properly. 

DIY repairs can be a great option, but it is essential to have the necessary tools and skills. However, hiring a professional for Washing Machine and Dryer Repair is always the safest and most secure option.

 

Importance of a washing machine and dryer repair

A washing machine and dryer are essential household appliances that play a pivotal role in keeping your clothes clean, fresh and hygienic. Without them, washing clothes can be a strenuous task, particularly for large households. The washing machine reduces time and effort, while the dryer helps quicken the drying process, particularly during bad weather conditions.

Both these appliances work together to provide the ultimate laundry experience. This is why, when either of these appliances breaks down, it can throw your entire routine off balance. As such, it is crucial to maintain and repair your washing machine and dryer in a timely manner to preserve their functionality and ensure you have clean clothes for your daily use.

 

 

Components of a washing machine and dryer

The components of a washing machine include the drum, which is the main compartment where clothes are loaded and washed, the agitator, which moves clothes around the drum to distribute water and detergent, the pump, which circulates water into and out of the drum, the motor, which powers the drum, agitator, and pump, the control panel, where users select the wash cycle, and sensors, which detect water level and temperature.

The components of a dryer include the drum, which is the main compartment where clothes are loaded and dried, the heating element, which heats the air inside the dryer to dry the clothes, the thermostat, which regulates the heating element to prevent overheating, the motor, which powers the drum, the control panel, where users select the drying cycle, and sensors, which detect the moisture level of the clothes to adjust the drying time.

 

 

 

Drum: 

The drum is the main compartment of the washing machine and dryer where clothes are loaded, washed and dried.

 

 

Agitator: 

The agitator is a vertical spindle with fins or blades that rotates to move the clothes around in the drum and help distribute the water and detergent.

 

 

Pump: 

Pump is responsible for circulating water into and out of the drum. It helps drain the dirty water out of the machine during the spin cycle.

 

 

Motor: 

The motor powers the drum, agitator, and pump to make the washing machine or dryer operate.

 

 

Control Panel: 

The control panel is where the user selects the wash cycle or dry cycle, water temperature, and other settings.

 

 

Sensors: 

Sensors detect the water level, temperature, and other parameters to ensure proper operation of the washing machine. It also detects the moisture level of the clothes and adjusts the drying time accordingly.

 

 

Heating Element: 

The heating element is responsible for heating the air inside the dryer to dry the clothes.

 

 

Thermostat: 

The thermostat monitors the temperature inside the dryer and regulates the heating element to prevent overheating.

 

 

Different types of washing machines and dryers available in Kathmandu

Top-Load Washing Machine:

This is the traditional washing machine design where the drum is loaded from the top. It is typically more affordable but uses more water and energy compared to front-load washing machines.

 

Front-Load Washing Machine:

This design features a horizontally-oriented drum that is loaded from the front. It is more energy-efficient and uses less water compared to top-load washing machines.

 

Semi-Automatic Washing Machine:

This type of washing machine has two separate compartments, one for washing and one for spinning. The user manually moves the clothes from one compartment to the other.

 

Fully-Automatic Washing Machine:

This type of washing machine does not require manual intervention. It automatically washes, rinses, and spins the clothes.

 

Compact Washing Machine:

This is a smaller washing machine designed for those with limited space or for those who need to do smaller loads.

 

Electric Dryer:

This type of dryer uses electricity to power the heating element that dries the clothes.

 

Gas Dryer:

This type of dryer uses natural gas or propane to power the heating element that dries the clothes.

 

Ventless Dryer:

This dryer design does not require a vent to the outside, making it ideal for apartments or other small living spaces. It uses condensation to remove moisture from the clothes.

 

Common washing machine & dryer problems with their Solutions

Washing machine does not start:

If your washing machine does not start, it can be quite frustrating. However, this is a common problem that many people face. The cause could be anything from a faulty power source to a malfunctioning control panel. To troubleshoot this issue, you can start by checking the power source of your machine. Ensure that the machine is properly plugged into the power outlet and that the outlet itself is working. If the power source is not the problem, then you may need to check the control panel of your machine. It may have a faulty circuit board or a broken switch that requires replacement. 

Washing machine does not spin or drain:

When your washing machine fails to spin or drain, it can be a frustrating experience. This common problem can be caused by various issues, such as a clogged drain hose, faulty lid switch, or a broken drive belt. To fix these problems, you can try DIY repairs, such as cleaning the drain or replacing the lid switch. However, if you are not confident with your DIY skills, it is recommended to hire a professional technician for washing machine and dryer repairs in Kathmandu. 

Washing machine is leaking:

If water is leaking from your washing machine, check the hoses and connections for any leaks or damage. Ensure the hoses are tightly connected and not damaged. If the hoses are not the issue, the problem may be with the pump or the tub, and it is best to call a professional.

Washing machine is making strange noises:

If your washing machine is making strange noises, such as banging or grinding, it may be due to an unbalanced load or a worn out drum bearing. Try redistributing the clothes evenly in the drum, and if the noise persists, it is best to call a professional. You can also use a balancer in the foot of the machine so that the vibration is reduced.

Washing machine is not dispensing detergent or fabric softener:

If the detergent or fabric softener is not being dispensed, check to make sure the dispenser is not clogged. Remove any buildup or blockage and ensure the dispenser is clean. If this does not resolve the issue, the problem may be with the dispenser motor or valve, and it is best to call a professional.

Dryer does not start:

If your dryer does not start, check to make sure it is plugged in and the circuit breaker has not tripped. Also, ensure the door is properly closed. If these are not the issue, the problem may be with the thermal fuse or start switch, and it is best to call a professional.

Dryer is not heating up:

It is recommended to disconnect the dryer from its power source and visually inspect the heating element for any damage. A clogged dryer vent can prevent the dryer from heating up efficiently, and it is recommended to clean the vent regularly. A malfunctioning thermostat can also cause the dryer to not heat up, and it is advisable to consult a professional for repair or replacement of the thermostat. However, if the issue persists, it is best to hire a professional to diagnose and repair the problem. 

Dryer is not tumbling:

If your dryer is not tumbling, it may be due to a broken drive belt or a faulty motor. Check the belt for any signs of damage or wear and replace if necessary. If the belt is intact, the problem may be with the motor, and it is best to call a professional.

Dryer is making strange noises:

If your dryer is making strange noises, such as squeaking or grinding, it may be due to worn out or faulty rollers or bearings. Check these components for any signs of wear or damage and replace them if necessary.

Dryer is taking too long to dry:

If your dryer is taking too long to dry, it may be due to a clogged vent or duct, or a faulty thermostat. Check the vent and duct for any blockages and remove if necessary. If this does not resolve the issue, the problem may be with the thermostat.

Clothes are not drying properly:

There could be several reasons for this problem, including a clogged lint filter, a malfunctioning heating element, or even simple user error. It’s important to properly understand the components and workings of your machine to diagnose the issue and find an appropriate solution.

DIY Washing Machine and Dryer Repair:

For those who are comfortable with their DIY skills, repairing a washing machine or dryer can save time and money. Before starting, it is important to turn off the power and water supply, and to familiarize oneself with the specific brand and model of the appliance. Common repairs include fixing clogs in the drain hose or lint filter and replacing faulty belts or motors. However, it is important to note that attempting complex repairs without proper experience and training can cause further damage and may be dangerous.

Common washing machine and dryer repair tips and tricks

Common washing machine and dryer problems can be frustrating to deal with, but there are some simple tips and tricks that you can try before calling in professional help. 

For example, if your washing machine does not start, check to make sure it is plugged in and that the power cord is not damaged. If your washer does not spin or drain, make sure the lid is closed properly and that the drainage hose is not clogged. 

If your dryer is not heating up, check the heating element and thermostat to see if they need to be replaced. Finally, if your clothes are not drying properly, clean the lint filter and make sure the dryer vent is not clogged. 

By following these simple repair tips and tricks, you can save yourself time and money on costly repairs. 

Basic tools needed for DIY washing machine and dryer repair

To perform basic repairs on washing machines and dryers in Kathmandu, Nepal, homeowners need a set of basic tools. These include a multimeter for testing electrical components, screwdrivers for removing panels, pliers for gripping and turning nuts and bolts, and a wrench for loosening and tightening fittings. 

Screwdriver:

A screwdriver is an essential tool for removing screws on the back and front panels of the washing machine or dryer. A Phillips-head and flat-head screwdriver are the most commonly used types.

Pliers:

Pliers come in handy for loosening and tightening nuts and bolts. They are also useful for removing clamps and connectors.

Wrenches:

Wrenches are necessary for loosening and tightening nuts and bolts. Adjustable wrenches are versatile and can be adjusted to fit different sizes of nuts and bolts.

Multimeter:

A multimeter is used to test the continuity of electrical circuits and diagnose electrical problems in a washing machine or dryer.

Wire Cutters:

Wire cutters are essential for cutting and stripping wires when repairing electrical components of a washing machine or dryer.

Nut Drivers:

Nut drivers are used to remove and install hex-head screws and bolts.

Putty Knife:

A putty knife is useful for removing old gaskets, seals, and adhesives when repairing a washing machine or dryer.

Flashlight: A flashlight is useful for illuminating dark areas in the washing machine or dryer where repairs are being made.

Hire a Professional for Washing Machine and Dryer Repair

While DIY repairs may seem appealing, it is important to understand that washing machines and dryers are complex appliances that require professional care. Hiring a professional for washing machine and dryer repair in Kathmandu, Nepal can save time, effort, and money in the long run. Professional technicians have the necessary skills and expertise to diagnose and fix common problems quickly and efficiently. They also have access to tools and equipment that are not always available to the average homeowner. 

The designs and features of washing machines vary greatly, but there are some issues that tend to occur frequently, and some that don’t occur as frequently, that are common to all of them. Let’s have a look at some of these problems that we have tried to address in the past, and let’s take a closer look at each one one by one.

The washer won’t drain

One of the most common problems we encounter is a washing machine that does not drain.

Some of the reasons that can contribute to it:

• A small item of clothing or residue of dirt has blocked the drain hose or pump.
• There is a malfunction with the washer, and the drain/spin cycle is not engaging properly. Depending on your product manual or manufacturer, you may see an error code.
• Damaged drain pump (the washer may make an unpleasant noise and/or leak if this is the case).

Solutions:

Resetting your washing machine:

• Perform a general reset of the machine first. Restart the machine after it has been turned off for one minute at the power point.
• If nothing changes, you can try a Master Reset. It is often used successfully by appliance technicians to reset all of the onboard componentry. During the time of 12 seconds, open and close the washing machine door six times. Run the rinse/spin cycle without clothing to see if your problems have been resolved. If it drains, the problem is solved! Otherwise, let’s get started on removing the blockage.

Cleaning out the drain line:

• The machine should be turned off at the power point. It is always a good idea to do this before moving or adjusting a machine.
• Make sure the drain pipe  is not kinked or bent. It may be affecting the washer’s draining and causing the error.
• The drain pipe should now be removed from the back of the machine. It is usually attached with a couple of simple screws. Accessing the pipe entry point may require pulling the washer from its place.
• Use water to force the blockage out of the drain pipe. The connection can be made using an outdoor pipe. A plumbing snake, stick, or long object can also be used to push out the blockage or item.

Run the hottest water on your machine without clothing if you aren’t able to easily remove the drain pipe. This may loosen up the blockage and push it out.

After the washer drain pipe has been steadily running for a few minutes, reattach it to the machine. It’s important to make sure your machine drains efficiently by ensuring the pipe ends are not kinked or bent and not more than 12 cm from the drain hole.

Washer door won’t open

Front loaders are most likely to have this problem, since top loaders don’t need to lock their doors.

This could be due to a number of factors:

• A jammed locking mechanism may have been caused by clothing.
• The washer’s sensor may be malfunctioning.
• It is possible that the washing machine is not draining properly, leaving the door locked and water in the drum.

Solutions:

• If you suspect a digital problem, try a reset. Turn off the washing machine at the power point for at least 60 seconds, and then turn it back on. Hopefully, the master reset will restart the wash programs.
• If you suspect your clothes are jamming the lock, run another short cycle in the washer. Hopefully this will unjam the lock and get the clothes moving. Although your clothes will be washed twice, it saves you from having to call a technician!
• When the machine does not drain, you may need to check the drainage pipe for blockage. Wash cycles can also be affected by kinked drain hoses.
• When all else fails, contact the repair expert  – they can provide you with advice, and if your machine is still under warranty, arrange for a professional repairer to come by.

Smelly washing machine:

Over time, washing machines become dirty and smelly. Those same unpleasant smells are then transferred to our clothes, so we end up having to wash them repeatedly.

While the washing machine is empty, run a cycle to allow water and cleaning solution to flow through all the gaps and corners. You can also use a Hot Cycle as an alternative to a dedicated Drum Clean cycle in most modern machines.

Solution: 

How to clean your washing machine:

Both front-loaders and top-loaders can be cleaned with this method.

Here are the supplies you’ll need:

• Vinegar, 2 cups
• Baking soda (bicarb) – 1/4 cup
• 1/4 cup of water

• Make sure that any residual scum or dirt around the washer opening is scrubbed away before continuing.
• Combine the water and baking soda in a small container. Put this in your washing machine’s detergent compartment.
• The vinegar should be poured directly into the drum of the washing machine.
• Select the hottest setting on your washer and begin the cycle. When vinegar and baking soda are combined, dirt and mineral build-up will be removed and your washer will smell fresher.

Tip: Maintain your machine’s performance by cleaning it every 1-2 months.

Washing machine keeps jumping:

If you’ve ever put on a load of laundry and come back later to find that the machine somehow danced across your clothes, then you know how annoying it is.

It’s very likely that your washer is out of balance.

The centrifugal force of a washing machine removes water from your clothes by spinning them at high speeds. In the case of a washer with one leg that’s shorter than the other, the machine will move around a lot. 

The noise is dangerous, and the machine is probably damaged every time it happens.

Solution:

Make sure that the machine is on level. It is important to make sure that all the feet are on a flat surface. To check this, use a spirit level and adjust the legs as necessary.

Rearranging your clothes in the washer can make a big difference. If possible, pause the cycle and spread the clothes evenly through the drum, so that there isn’t one heavy clump being spun around.

Consider contacting a repair expert or purchasing a new machine if the problem persists.

Although you do not need to run a Self Clean cycle immediately after the reminder appears, we recommend that you run one at your earliest opportunity. It’s also a good idea to run one at least once per month if you do not do many washes in a month.

What You’ll Need before cleaning

1. Liquid chlorine bleach
2. Hydrogen peroxide (optional)
3. Non-abrasive household cleanser
4. Mild detergent
5. Soft, absorbent cloth
6. Small nylon brush

Steps to clean front load washing machine

1. First, empty out the drum. Then remove the detergent dispenser and clean the tray and any attachments. Replace the items when they’re cleaned.
2. Next, clean the gasket around the drum and the door glass that faces the inside of the drum. Wipe these surfaces with a solution of three-quarters of a cup of chlorine bleach added to one gallon of water.
3. If your front-loader has a cleaning cycle, run it now. Follow the manufacturer’s instructions. Some washing machine manufacturers recommend using a specific cleaning product. Others say you can use liquid chlorine bleach or distilled white vinegar.
4. When the cleaning cycle is complete and your front load washing machine is cool, wipe the lid, opening and door glass with a soft cloth or towel. Then leave it ajar.

 

The best machines will sometimes develop a fault – which is why we’ve put together this guide on common washing machine faults and how to prevent them from happening.

Did you know that the average washing machine will last seven years and two months? And that it’ll get through a whopping 1,417 loads of washing in that time?

It’s true! And while most people probably don’t think about their washing machines too often, it’s important to be aware of these statistics – especially if your machine is starting to show signs of wear and tear.

So if you’re concerned about your machine’s lifespan, or if you’re just looking for ways to make sure it lasts as long as possible, then read on for our top tips on common washing machine symptoms that may lead to faults and how to prevent them from ever happening.

The ultimate, unbiased, guide, to choosing the best washing machine repair engineers and companies in London. London with its population of just under 9 million leaves no doubt that there are thousands of washing machines being serviced daily. With literally hundreds of companies to choose from it’s often difficult to know who you should spend